...and 30 seconds FeatUreS Cable Length ( Maximum ) — At console : 20 ft . ( 6 m ) ; and mouse to control a number of PS / 2 and USB servers ? At PC ports for PS / 2 server : 30 ft . ( 9.1 m ) ; » Resolution up to 1920 x 1440 . ™ EC for PS / 2 and USB ...

...feet ( 100 m ) ( CAT5 cable not included ) Order toll - free in the U.S . : Call 877 - 877 - BBOX ( outside U.S . call 724 - 746 - 5500 ) Customer FREE technical support 24 hours a day , 7 days a week : Call 724 - 746 - 5500 or fax 724 - 746 - 074...

...Energy All interface cables used with this equipment must be shielded in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances . European EMC dir...

...enab or VGA te VG m ) A cable units ( gain mon les versi A only on and you . itors ) supp ordin on , cont or audio to 724 - 7 VGA both ort with ary rol fine two on CAT up 46 - 5 plus - tune the the to 5 , local 500 bla the on loca ope to “ mix loca ...

...Attach the power cable and , on AC power supplies , move the toggle switch to the ON position . When the unit is receiving power , the green PWR ( power ) LED will light . Black Box Customer Service Call : ( 724 ) 746 - 5500 Phone orders 24 h...

...LMC3001A MGT Cascade Cable ( 3 ft . ) � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � Network Management Software for � � � � � � � � � � � � � � � � � � � ...

...the DFCS NMM Cascade Cable ( Model Chassis The DFCS Network Management Module ( NMM ) provides “ A ” Link “ B ” Link Backplane 3 : IP and Control Preferences LMC3001A ) . Telnet and SNMP - based monitoring and control for the 4 : SNMP Preferences...

...that is , in strict accordance with the manufacturer’s instructions , may cause interference to radio communication . It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Su...

...one end of an HDMI cable to the HDMI port on the source device ( e.g . computer , server or other IT device ) . Then connect the other end to the HDMI IN port located on the TX unit . 3 . Connect the HDMI display to the HDMI OUT port on the TX ...

...unplug the Video - Cable to the Remote Monitor ( Dualhead devices : BOTH Monitors ! ) • Open the Local Unit like described above • Unplug Jumper JP1 and plug it to Position JP3 ( Dualhead devices : jumper setting on BOTH PCB’s ! ) • Switch on t...