AlertWerks Temperature Sensor String

Accurate hot spot detection that protects your IT equipment
Know the temperature differentials in your server cabinets. Choose from a sensor string with four temperature sensors and two dual temperature/humidity sensors or a sensor string with six temperature only sensors that always provide an accurate reading of the temperature differentials between front and back to ensure you know where the hot spots are.

Easy configuration for accurate hot spot readings
Place the sensors at the top, middle and bottom of the front and the rear of the cabinet for the best readings. This configuration monitors air intake and exhaust temperatures of your cabinet and the temperature differential from the front to the rear of the cabinet.

Streamlined installation
No time wasted hassling with wires. The sensor is prewired to be easily installed in your cabinet.
Sensors come with both magnetic strips and double-sided adhesive tape for easy attachment to your cabinet.

Space saving
Doesn’t add clutter to your AlertWerks sensor hub. The sensor string only uses a single sensor port on your AlertWerks hub, leaving plenty of ports for other crucial connections.

Sensor Type —
EME1THS — (4) Temperature; (2) Temperature/Humidity, pos. 2 and 5
EME1TS — (6) Temperature
Measurement Accuracy —
Humidity: 25°C ±3%; (EME1THS only)
Temperature: Maximum ±0.3 at -40°C (±0.6 at -40°F); Minimum ±0.3 at +25°C to +75°C (±0.6 at 77°F and to +167°F)
Measurement Range —
Humidity: 0 to 100% relative humidity; (EME1THS only)
Temperature: -40°C to +75°C (-40°F to +167°F)
Measurement Resolution —
Humidity: SensorProbes: 1%; SecurityProbes: 0.1%;
Temperature: 0.1°C increments (0.2°F increments)
Size — 492 x 5.6 x 2.7 cm (193.7 x 2.22 x 1.07 in)
Weight — 0.20 kg (.45 lbs)
Communications Cable — Temperature: RJ45 jack to temperature sensor, using UTP CAT5/6, maximum cable length: 18 metres (60 ft.)
Sensor Technology — Temperature: semi-conductor microprocessor controlled
Autodetection — Sensor Hub auto detects presence of Thermal Map Sensor and configures unit automatically
Power —
powered by the AlertWerks Hub, no additional power needed
Consumption: Typical 65 mWatt, 13 mA;