ICD107A: Industrial RS-422/RS-485 DIN Rail Repeater
Features optical isolation plus 600 W of surge suppression.
Adds 1219.2 metres and another 32 nodes to an RS-485 data circuit. Configure one side as RS-422 and the other side as RS-485 to enable a 4-wire RS-422 device to communicate with a 2-wire RS-485 device.
Modbus ASCII or RTU compatible.
Automatic Send Data Control eliminates the need for driver software.
MED101A: Industrial DIN Rail RS-232/V.24/RS-422/RS-485 <-> Multimode Fibre Driver
Enables any two async serial devices to communicate half- or full-duplex over two multimode ST fibres at distances up to 4 kilometres.
RS-232/V.24 signals are supported up to 115.2 kbps; RS-422 or RS-485 signals are supported up to 460.8 kbps.
Can do fibre ring/RS-485 Multidrop.
Modbus ASCII or RTU compatible.
Automatic Send Data Control eliminates the need for driver software.
Removeable terminal blocks.
MED102A: Industrial DIN Rail RS-232/V.24/RS-422/RS-485 <-> Single Mode Fibre Driver
Provides connections between asychronous full- or half duplex serial equipment over duplex single-mode fibre.
Extends communications up to 15 km.
Supports serial data up to 115.2 Kbps.
Can do fibre ring/RS-485 Multidrop.
Modbus ASCII or RTU compatible.
Automatic Send Data Control eliminates the need for driver software.
Operating Environment —
Temperature: -40 to +85°C;
Humidity: Up to 95% non-condensing
Operation —
ICD107A:
RS-422: Full-duplex;
RS-485: 2-wire half-duplex or 4-wire full-duplex
MED101A:
RS-232/V.24: Half- or full-duplex;
RS-422: Full-duplex;
RS-485: 2-wire half-duplex or 4-wire full-duplex;
Fibre ring: Half-duplex over multimode;
All transmissions are async
MED102A:
RS-232/V.24: Half- or full-duplex;
RS-422/: 2-wire half-duplex or 4-wire full-duplex;
Fibre ring: Half-duplex over singlemode;
All transmissions are async
Speed —
ICD107A: 2400 bps to 115.2 kbps, switch-selectable; other rates available up to 460.8 kbps
MED101A/MED102A: RS-232/V.24: Up to 115.2 kbps; RS-422/RS-485: Up to 460.8 kbps
Warenkorb
Login
Kontakt
