Two different power inputs at the terminal block prevent the power interruptions. When the primary DC power input fails, the backup power input takes over to guarantee non-stop operation.
Approvals —
EMI: FCC Part 15, CISPR (EN55022) class A, E-Mark;
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS);
EN61000-4-4 (EFT), EN61000-4-5 (Surge);
EN61000-4-6 (CS), EN61000-4-8;
EN61000-4-11;
Shock: IEC60068-2-27;
Free fall: IEC60068-2-32;
Vibration: IEC60068-2-6
Standards —
IEEE 802.3 for 10BASE-T;
IEEE 802.3u for 100BASE-TX;
IEEE 802.3ab for 1000BASE-T;
IEEE 802.3x for flow control;
IEEE 802.3at compliant PoE (up to 30 watts per port for PSE)
Jumbo Frame — Up to 9 kbytes
MAC Table —8K MAC addresses
Processing — Store-and-forward
User Controls — (2) DIP switches,
(1) Power-1 failed warning: ON = enable, OFF = disable;
(1) Power-2 failed warning: ON = enable, OFF = disable
Connectors —
(8) 10/100/1000BASE-T(X) RJ-45 ports with PSE
(1) 6-pin terminal block for power
Indicators — (19) LEDs: (2) Power (green), (1) Fault (amber), (8) Link/Act (green), (8) PoE power injected (green)
Fault Contact — Relay output to carry capacity of 1 A @ 24 VDC
Environmental —
Operating Temperature: -40 to +75° C (-40 to +167° F);
Humidity: 10 to 90%, relative humidity
Enclosure — IP-30
PoE Output — 60 Watts @ 12-24 VDC; 120 Watts @24-57 VDC
Power —
Input: Redundant dual DC inputs, 12 to 57VDC on a 6-pin terminal block;
Consumption (Typ.): 6 watts;
Overload current protection: present;
Reverse polarity protection: NOT present
Dimensions — 14.4 x 4.1 x 9.5 cm (5.6"H x 1.6"W x 3.7"D)
Weight —
Shipping: 0.45 kg (1 lb.)
(1) Industrial Unmanaged Gigabit PoE+ Switch
(1) 6-pin terminal block
(8) Dust covers for RJ-45 ports
(3) M3 round screws
(2) Wallmount brackets
(1) 40-mm DIN-rail bracket
Mon panier
S’identifier
Nous contacter
