...interconnect different cable types-twisted pair, fibre, and Thin or thick coax-within a network. They are usually used to connect newer 10BASE-T equipment to existing BNC/ThinNet or fibre networks. They can also be used in pairs to insert a fibre s...

...more efficient in-house cable runs. • Bell 212A • -Synchronous/asynchronous data transmission, full-duplex operation over 2-wire leased or dialup lines; 1200-bps data rate. This versatile standard provides for efficient full-duplex operation over 2-...

...outside-plant telephone cable network that runs right to your home or office. • The appeal is obvious: This technology enables telephone companies to offer broadband service without major network rewiring and can be implemented quickly and profitabl...

...modems via RS-232 cable. Many remote access servers also support ISDN with either internal ISDN circuitry or through external terminal adapters. • The remote access server enables remote users to dial into the LAN via a modem connection and us...

...means the interconnect cable requires less board space. • Thinner cables • Serial ATA also uses thinner cables (no more than 6.3mm wide) that are available in longer lengths (up to 1 metre) as well as an improved connector design to reduce crosstal...

...Possible causes: • Bad cable or cable that’s too long, causing either the video signals or EDID/HDCP control signals not to be transmitted properly. Make sure that you use quality, high-speed HDMI® cables—they don’t even have to be expensive ones—o...

IP-Based Distribution • IP-Based A/V Distribution • IP-based distribution technologies use transmitters and receivers to extend signals over a TCP/IP network (a LAN or even a WAN, for instance). Oftentimes, they’re called IP streamers when use...

...etc. S/PDIF is based on the professional AES3 interconnect standard. • S/PDIF signals are carried over two types of cables. The first is a 75-ohm coaxial cable with orange RCA connectors. The second is a fiber cable with TOSLINK connectors.